Cleaning And Maintenance - MSW Motor Technics MSW-BC-A Manual De Instrucciones

2. With the correct voltage level set, the battery charging process will begin
automatically after approx. 5 seconds.
3. Pressing MODE during the charging process will stop the charger. Pressing
MODE again will resume the charging process.
4. When done charging, unplug the power cord from the mains. Disconnect the
quick-release connectors and remove the charging lead terminal clamps.

3.4. Cleaning and maintenance

a) Before cleaning, adjustment or replacement of accessories, and when the
appliance is not in use, unplug the power cord from the mains and leave the
appliance to cool down completely.
b) After each cleaning, dry all components well before the appliance is used
again.
c) Store the appliance in a dry and cool place, protected from moisture and direct
sunlight.
d) Do not spray the appliance with a stream of water and do not immerse it in
water.
e) Regularly inspect the appliance for technical defects and damage.
f) Use a soft, damp cloth for cleaning.
g) Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the appliance.
h) Do not clean the appliance with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
DISPOSAL OF WASTE EQUIPMENT
At the end of its service life, this product must not be disposed of with mixed
household waste; return it to a collector/recycler of waste electrical and electronic
equipment. This is shown by the symbol placed on the product, the user manual
or the packaging. The materials used in the appliance can be reused according to
their classification identifications. By reuse, recycling or applying other forms of
use of waste appliances, you make a significant contribution to the protection of
our environment.
Local administration will provide you with the information about the nearest
disposal locations for the appliance.