Switching On; Working - Stihl RE 98 Manual De Instrucciones

English

Switching On

Turn on water supply
N
NOTICE
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
Completely unroll the high-pressure
N
hose
Move the master switch to I – now
N
the machine is in standby mode
Point the spray gun at the object to
N
be cleaned – never at persons!
34
All manuals and user guides at all-guides.com

Working

Actuate the spray gun
Point the spray attachment at the
N
object to be cleaned – never at
persons!
Point the rotary nozzle downwards
N
when starting (if fitted)
2
1
Press the safety latch (1) – the lever
N
(2) is unlatched
Squeeze the lever (2)
N
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Nozzles
1
+
Fan-jet nozzle (1)
The operating pressure can be infinitely
adjusted at the nozzle.
Jet angle 15°, maximum effect at a
distance of approx. 7 cm.
Turn nozzle sleeve
N
Rotary nozzle (2)
Nozzle with rotating jet for stubborn dirt
on hard surfaces. Maximum effect at a
distance of 10 cm.
The spray attachment can also be used
without nozzles at low pressure, e.g., for
rinsing with a large flow of water.
2
RE 98