Bosch GSS 23 AE Professional Manual Original página 13

(15) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Orbital sander
Article number
Rated power input
Orbital stroke rate preselec-
tion
No-load speed min
No-load orbital stroke rate min
Orbit diameter
Sanding sheet dimensions
– Hook-and-loop backing
– Clamping tension
Sanding plate dimensions
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-4.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 80 dB(A); sound power level
91 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 4.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
GSS 23 AE
Dust/Chip Extraction
3 601 K70 7..
The dust from materials such as lead paint, some types of
W 190
wood, minerals and metal can be harmful to human health.
●
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
–1
7000–12000
people in the near vicinity.
–1
14000–24000 Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
mm 2.0
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
mm 93 x 185
– Use a dust extraction system that is suitable for the ma-
mm 93 x 230
– Provide good ventilation at the workplace.
mm 92 x 182
– It is advisable to wear a P2 filter class breathing mask.
kg 1.7
The regulations on the material being machined that apply in
the country of use must be observed.
/ II
u
Self-generated dust extraction with dust box
(see figures G1–G4)
Place the dust box (4) onto the extraction outlet (12) until it
clicks into place.
To empty the dust box (4), pull the dust box downwards.
Before opening the dust box (4), knock the dust box against
a firm surface as shown in the figure to loosen the dust from
the filter element.
Take hold of the dust box (4) by the recessed grip, fold the
filter element (13) upwards out of the way and empty the
dust box. Use a soft brush to clean the flaps of the filter ele-
ment (13).
External dust extraction (see figure H)
Fit a dust extraction hose (14) onto the extraction outlet
(12).
Connect the dust extraction hose (14) to an extractor. You
will find an overview of connecting to various dust extractors
at the end of these operating instructions.
The dust extractor must be suitable for the material being
worked.
When extracting dry dust that is especially detrimental to
health or carcinogenic, use a special dust extractor.
In Germany, wood dust extraction requires extraction
devices which have been tested on the basis of TRGS 553;
self-generated dust extraction must not be used in the com-
mercial sector. Commercial operators must clarify the spe-
cific requirements for other materials with the responsible
trade association.
Pull the plug out of the socket before carrying out any
work on the power tool.
terial wherever possible.
Avoid dust accumulation at the workplace. Dust can
easily ignite.
1 609 92A 7TH | (24.06.2022)
English | 13