CLEANING AND MAINTENANCE
1) Air filter
To clean the air filter, use clean water and a soft brush to remove dust.
2) Water Tank
1) Ensure that the unit is switched off entirely.
2) Remove the back cover with air filter to access the tank.
3) Using mild soap, clean the sediments and inside of the tank.
4) Remove the stopper from the drainage outlet, draining any remaining water.
5) Place the stopper back into the draining outlet, ensuring it is firm before using the unit
again.
3) Outer Body
To clean the outer body, use a soft and damp cloth (not dripping wet) with mild soap.
NOTE:
● If using continuously, ensure the water is replaced with fresh water at least once a week.
Occasionally clean the air filter, then let it dry completely before placing back into the
unit.
● When not in use, unplug the appliance, then thoroughly drain the water. Place the unit
back into its original box for storage.
● In any events of malfunction or doubt, do not attempt to repair the appliance by yourself,
as it may result in a fire hazard or electric shock.
WARNING:
Before cleaning, unplug the unit and allow the fan to completely stop.
Do not immerse the unit in water.
Do not use any cleaning chemicals, such as detergents and abrasives.
Do not let the inside (especially the PCB) get in contact with water as it could be
dangerous.
MAIN SPECIFICATION
Voltage:
Rated Power:
Max. Water Tank Capacity:
Motor:
NOTICE
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advise.
220-240V, 50/60Hz
65W
15.0L
3-Speed
5