General Information; Control Panel - Ferroli ATLAS D ECO 34 COND UNIT Instrucciones De Uso, Instalación Y Mantenimiento

EN

1. GENERAL INFORMATION

• Read the warnings in this instruction booklet carefully since they provide important
information on safe installation, use and maintenance.
• This instruction booklet is an integral and essential part of the product and must be
kept with care by the user for future reference.
• If the unit is sold or transferred to another owner or if it is to be moved, always make
sure the booklet stays with the boiler so that it can be consulted by the new owner
and/or installer.
• Installation and maintenance must be carried out by professionally qualified person-
nel, according to current regulations and the manufacturer's instructions.
• Incorrect installation or inadequate maintenance can result in damage or injury. The
manufacturer declines any liability for damage caused by errors in installation and
use or by failure to follow the instructions provided.
• Before carrying out any cleaning or maintenance operation, disconnect the unit from
the power supply using the system switch and/or the special cut-off devices.
• In case of a fault and/or poor operation, deactivate the unit and do not try to repair
it or directly intervene. Contact professionally qualified personnel. Any repair/re-
placement of the products must only be carried out by qualified personnel using gen-
uine parts. Failure to comply with the above can compromise the safety of the unit.
• Periodic maintenance performed by qualified personnel is essential in order to en-
sure proper operation of the unit.
• This unit must only be used for its intended purpose. Any other use is deemed im-
proper and therefore hazardous.
• After unpacking, check the good condition of the contents. The packing materials
are potentially hazardous and must not be left within the reach of children.
• The unit can be used by children aged at least 8 years and by persons with reduced
physical, sensory or mental capabilities, or lacking experience or the necessary
knowledge, only if under supervision or they have received instructions on its safe
use and the related risks. Children must not play with the unit. Cleaning and main-
tenance intended to be done by the user can be carried out by children aged at least
8 years only if under supervision.
• In case of doubt, do not use the unit. Contact the supplier.
• The unit and its accessories must be appropriately disposed of in compliance with
current regulations.
• The images given in this manual are a simplified representation of the product. In
this representation there may be slight and insignificant differences with respect to
the product supplied.
THE CE MARKING CERTIFIES THAT THE PRODUCTS MEET THE ESSENTIAL REQUIREMENTS
OF THE RELEVANT DIRECTIVES IN FORCE.
THE DECLARATION OF CONFORMITY MAY BE REQUESTED FROM THE MANUFACTURER.
2. OPERATING INSTRUCTIONS
2.1 Introduction
Dear Customer,
Thank you for choosing a FERROLI boiler featuring advanced design, cutting-edge tech-
nology, high reliability and quality construction. Please read this manual carefully since
it provides important information on safe installation, use and maintenance.
ATLAS D ECO COND UNIT is a high-efficiency condensing heat generator for heating
and domestic hot water production (optional), equipped with a blown oil burner, wet fume
chamber and fume heat recuperator in ceramic material. The boiler shell consists of cast-
iron elements, assembled with double cones and steel stays. The control system is with
microprocessor and digital interface with advanced temperature control functions.
The boiler is arranged for connection to an external hot water storage
A
tank (optional). In this manual all the functions relevant to domestic hot
water production are only active with the optional hot water tank connect-
ed as indicated in sec. 3.3

2.2 Control panel

Panel
11 12 1 14 2 19
13
27
26 24 3 25 23 4 22
fig. 1 - Control panel
34
EN
15 5 16 7
21 20 18 17 6
cod. 3541Q460 - Rev. 00 - 10/2015
ATLAS D ECO COND UNIT
Panel key
DHW temperature setting decrease button
1 =
DHW temperature setting increase button
2 =
Heating system temperature setting decrease button
3 =
Heating system temperature setting increase button
4 =
Display
5 =
Summer / Winter mode selection button
6 =
Economy / Comfort mode selection button
7 =
Reset button
8 =
Unit On / Off button
9 =
"Sliding Temperature" menu button
10 =
Set DHW temperature reached
11 =
DHW symbol
12 =
DHW mode
13 =
DHW outlet temperature / setting
14 =
Eco (Economy) or Comfort mode
15 =
External sensor temperature (with optional external probe)
16 =
Appears on connecting the external Probe or the Remote Timer Control (op-
17 =
tionals)
Room temperature (with optional Remote Timer Control)
18 =
Burner On
19 =
Antifreeze operation
20 =
Heating system pressure
21 =
Fault
22 =
Heating delivery temperature/setting
23 =
Heating symbol
24 =
Heating mode
25 =
Set heating delivery temperature reached
26 =
Summer mode
27 =
Indication during operation
Heating
A heating demand (generated by the Room Thermostat or Remote Timer Control) is in-
dicated by flashing of the hot air above the radiator (details 24 and 25 - fig. 1).
The heating graduation marks (detail 26 - fig. 1) light up as the heating sensor tempera-
ture reaches the set value.
DHW (Comfort)
A DHW demand (generated by drawing domestic hot water) is indicated by flashing of
the hot water under the tap (details 12 and 13 - fig. 1). Make sure the Comfort function
(detail 15 - fig. 1) is activated
The DHW graduation marks (detail 11 - fig. 1) light up as the DHW sensor temperature
reaches the set value.
9 10
Exclude hot water tank (economy)
Hot water tank temperature maintaining/heating can be excluded by the user. If exclud-
ed, domestic hot water will not be delivered.
When hot water tank heating is activated (default setting), the COMFORT symbol (detail
15 - fig. 1) is activated on the display, and when off, the ECO symbol (detail 15 - fig. 1)
is activated on the display
The hot water tank can be deactivated by the user (ECO mode) by pressing the eco/
comfort button (detail 7 - fig. 1). To activate the COMFORT mode, press the eco/comfort
button (detail 7 - fig. 1) again.
8
fig. 2
fig. 3