Specifications
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output: 70 Watts RMS × 4 at
4 Ohms < 1% THD+N
SN Ratio: 93 dBA
(reference: 1 Watt into 4 Ohms)
Circuit system
OTL (output transformerless) circuit,
Pulse power supply
Inputs
RCA pin jacks,
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
3 – 12 V (High level input)
Outputs
Speaker terminals
Speaker impedance
2 – 8 Ω (stereo),
4 – 8 Ω (when used as a bridging amplifier)
Maximum output
2 Speakers: 350 W × 2 (at 4 Ω)
4 Speakers: 150 W × 4 (at 4 Ω)
Rated output
(supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 %
THD)
2 Speakers: 160 W × 2 (at 4 Ω)
4 Speakers: 80 W × 4 (at 2 Ω),
70 W × 4 (at 4 Ω)
Frequency response
+0.5
10 Hz – 100 kHz (
−3.0
Harmonic distortion
0.05 % or less (at 1 kHz, 4 Ω)
Low-pass filter
50 – 300 Hz, 12 dB/oct
High-pass filter
50 – 300 Hz, 12 dB/oct
Subsonic filter
6 – 70 Hz, 12 dB/oct
Low boost
0 – 10 dB (40 Hz)
Power requirements
12 V DC car battery (negative ground (earth))
Power supply voltage
10.5 – 16 V
Current drain
At rated output: 33 A (4 Ω, 70 W × 4)
Remote input: 1 mA
10
GB
dB)
Dimensions
Approx. 272 × 51 × 202 mm (10
(w/h/d) not incl. projecting parts and controls
272 mm (10
3
/
in)
4
162 mm (6
1
/
in)
2
251 mm (10 in)
149.5 mm (6 in)
202 mm (8 in)
51 mm (2
/
in)
1
8
Mass
Approx. 2.7 kg (6 lb) not incl. accessories
Package contents:
Main unit (1)
Mounting screws (4)
High level input cord (1)
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for detailed
information.
Design and specifications are subject to change
without notice.
3
/
× 2
1
/
× 8 in)
4
8