Install Duct Covers - Dacor DHDU990W/DA Serie Instrucciones Para Instalación

Installation

Install duct covers

• When using both upper and lower vent covers, push
lower cover down onto hood and lift upper cover to
ceiling and install with two mounting screws.
NOTE
The upper vent cover may be reversed to hide slots.
1. Place a tissue or soft cloth between duct covers to
prevent scratching while installing.
2. Insert the complete duct cover at an angle and swivel
toward the wall.
3. Remove the tissue or soft cloth.
18 ENGLISH
4. Carefully pull the top part of the extension upwards.
Screw the left and right sides of the extension to the
mounting bracket with 2 -3.5 x 9.5 mm screws.
5. Secure the bottom of the duct with 2 - 4.2 x 8 mm
screws.