VANTRUE Element 2 Manual Del Usuario página 15

Note: There are two electrostatic stickers numbered 1 and 2. Please EN
remove the protective film from No. 1, paste the electrostatic sticker on
the windshield, and then remove the protective film from No.2. Remove
the 3M tape from the mount, then fix the mount and camera on the
electrostatics stickers.
4. Take out the rear camera cable, connect the main camera and the
rear camera, and take out the car charger to connect it. After the
camera is powered on, choose a suitable location and install it.
- 10 -