VANTRUE Element 2 Manual Del Usuario página 34

EN
Video recording process: When the camera detects object movement or
car vibration, it will automatically trigger video recording. E2 comes with
a pre-recording function. When the motion detection recording is over,
the camera will load the pre-recorded video into the motion detection
video and save it to the normal folder.
Note: Motion detection mode can only be engaged when the camera is
turned on. Once the camera is turned off, the motion detection mode will
not work.
Low Bitrate Recording
When Low Bitrate recording is enabled, the icons
displayed on the recording interface, depending on whether you choose
1080P 15FPS or 720P 15FPS.
If no movement is detected after 5 minutes of recording, there will be a
icon that appears in the center of the screen. The resolution of all
current video will be automatically switched to 1080P 15FPS or 720P 15FPS
for recording, and the recording duration will be determined according to
the currently set loop recording duration. When the camera is vibrates or is
moved, it will automatically exit, wait 5 minutes, and enter again.
1440P+1440P 30FPS
00:00:37 14:39:07
- 29 -
80
06-20-2022 MP/H
or will be