BIG ASS FANS HAIKU R Guia De Instalacion página 15

UNIVERSAL MOUNT INSTALLATION
6. Reduce slack
Make sure all hardware is secure, and then gently tug cables at top of downrod to
reduce slack (Fig. 6). Make sure rubber plug at top of downrod stays in place.
Fig. 6
7. Position wiring cover and canopy
Slide wiring cover down the downrod, resting it on the motor unit or uplight. Make sure
no wires are visible. Slide canopy down the downrod, resting it on the wiring cover
(Fig. 7).
Fig. 7
Canopy
Wiring Cover
13