Ninja DG550 Serie Guia Del Propietario página 6

USING THE NINJA® FOODI® SMART XL GRILL – CONT.
To turn on the unit, plug the power cord into a wall outlet, then press the
Roast
1 Place cooking pot in the unit with the indent
on the pot aligned with the bump on the main
unit. Ensure the splatter shield is in place, then
close the hood.
2
Press the ROAST button. The default
temperature setting will display. Use the set
of arrows to the left of the display to adjust
the temperature up to 425°F.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check food
frequently to avoid overcooking.
3 Use the set of arrows to the right of the display
to adjust the cook time, in 1-minute increments
up to 1 hour and 5-minute increments from 1 to
4 hours, or, if using the thermometer, refer to the
Using the Foodi Smart Thermometer section.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating. It will take
approximately 3 minutes for the unit to preheat.
NOTE: While preheating is strongly
recommended for best results, you can skip
it by pressing the PREHEAT button. "ADD
FOOD" will appear on the display. Open the
hood and place ingredients in the cooking pot.
Once the hood is closed, cooking will begin
and the timer will start counting down.
10 ninjakitchen.com
button.
5
When preheating is complete, the unit will beep
and "ADD FOOD" will appear on the display.
6
Open the hood and place ingredients in the
pot. Once the hood is closed, cooking will
begin and the timer will start counting down.
NOTE: To use the thermometer just to check your
food's internal doneness, press MANUAL for 2
seconds and the food's internal temperature will
appear on the screen. Press and hold button
again to exit mode.
7
When cook time is complete, the unit will beep
and END will appear on the display.
To turn on the unit, plug the power cord into a wall outlet, then press the
Bake
1 Place cooking pot in the unit with the indent on
the pot aligned with the bump on the main unit.
Ensure the splatter shield is in place, then close
the hood.
2 Press the BAKE button. The default
temperature setting will display. Use the set of
arrows to the left of the display to adjust the
temperature up to 400°F.
NOTE: Convert traditional oven recipes by
reducing the temperature by 25°F. Check
food frequently to avoid overcooking.
3
Use the set of arrows to the right of the display
to adjust the cook time, in 1-minute increments,
up to 1 hour and in 5-minutes increments from 1
to 2 hours, or, if using the thermometer, refer to
Using the Foodi™ Smart Thermometer section.
4 Press START/STOP to begin preheating. The
progress bar will begin illuminating. It will take
approximately 3 minutes for the unit to preheat.
button.
NOTE: While preheating is strongly
recommended for best results, you can skip
it by pressing the PREHEAT button. "ADD
FOOD" will appear on the display. Open the
hood and place ingredients in the crisper
basket. Once the hood is closed, cooking will
begin and the timer will start counting down.
5
When preheating is complete, the unit will
beep and "ADD FOOD" will appear on the
display.
6 Open the hood and add ingredients to the
pot or set the bake pan directly in the pot,
and close the hood to start cooking. Once the
hood is closed, cooking will begin and the
timer will start counting down.
Bake pan
not included
NOTE: To use the thermometer to just
check your food's internal doneness, press
MANUAL for 2 seconds and the food's internal
temperature will appear on the screen. Press
and hold button again to exit mode.
7 When cook time is complete, the unit will beep
and END will appear on the display.
ninjakitchen.com 11