Maintenance And Cleaning; Technical Data - Batavia BT-CRS004 Manual De Usuario

Flush sawing
• Elastic bi-metal saw blades allow you to
saw protruding objects (e,g, water pipes,
iron bars, etc,) nearby the wall.
• Apply the saw blade directly to the wall
and bend slightly so that the footplate
rests against the wall.
• Switch the machine on and saw off the
workpiece keeping constant lateral pres-
sure against the wall.

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains
power supply, before carrying out any mainte-
nance/ cleaning of the charger. Remove the
battery before carrying out any maintenance/
cleaning of the tool.
Maintenance
There are no inner parts of the tool which need
maintenance.
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap. Do
not use any cleaning or solvent materials;
these can attack the device's plastic com-
ponents. Make sure that no water can get
inside the electric power tool.

TECHNICAL DATA

Speed . . . . . . . . . . . . . 0 – 2700 min
Saw Blade Mount . . . . . . Rotating Sleeve
Saw Stroke . . . . . . . . . . . . . . . 20 mm
Weight . . . . . . . . . . . . . . . . . 1.04 kg
Sound Pressure Level L
Uncertainty K
pA
Sound Power Level L
Uncertainty K
WA
Hand Arm Vibration
Wood. . . . . . . . . . . . . . . 9.154 m/s
Metal . . . . . . . . . . . . . . . 7.845 m/s
Uncertainty K . . . . . . . . . . . . . 1.5 m/s
7064217-Cordless_Reciprocating_Saw-Ma-EN-2207-12.indb 7 7064217-Cordless_Reciprocating_Saw-Ma-EN-2207-12.indb 7
. . . . . 84.3 dB(A)
pA
. . . . . . . . . . . . . . 3 dB
. . . . . . . 95.3 dB(A)
WA
. . . . . . . . . . . . . . 3 dB
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN62841; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned.
– using the tool for different applications, or
with different or poorly maintained
accessories, may significantly increase the
exposure level
– the times when the tool is switched off or
when it is running but not actually doing
the job, may significantly reduce the
exposure level
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns.
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
-1
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.
2
2
2
.
English
7
12-07-2022 14:49 12-07-2022 14:49