jotron WP 900 Manual Del Usuario página 13

Installation Guide
T942C- and T942C/2 Central Unit
Figure 9. Wiring of modular or twisted pair cabling, 1 and 2.
• Run the wiring out through the cable duct at the bottom.
• Use the slots at the opening to secure the wiring with cable straps.
Wiring can be run four ways for connection with other units:
1
Figure 10. Four ways of wiring runs.
• Remove the rectangular covers and run the cabling out through the side (1).
• Break off sections at short side of case and run the cabling downwards (2).
• Run the cabling through the round holes at the bottom of the case (3).
• Remove the circular covers at the top of the side case (4).
2003-01-08 / Rev.C
1 1
1 2 3 4 5 6
2
Slots
3
3
2
2
1
Handook page
11/128
TD 91684GB
4
9