English (Original Instructions); Random Orbit Sander - Black and Decker KA191EK Traducido De Las Instrucciones Originales

EnGLIsH

RANDOM ORBIT SANDER

KA191EK
Congratulations!
You have chosen a BLACK+DECKER tool. Years of experience,
thorough product development and innovation make
BLACK+DECKER one of the most reliable partners for consumer
power tool users.
Voltage
Type
Power output
Pad size
Orbits
Weight
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑4:2014:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
18
KA191EK
V 230
AC
1
W 480
mm 125
min ‑1 4000–11000
kg 2.47
dB(A) 83.5
dB(A) 94.5
dB(A) 3
m/s 2 6.9
m/s 2 1.5
EC‑Declaration of Conformity
o
Machinery Directive
Random Orbit Sander
KA191EK
BLACK+DECKER declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑4:2014.
For more information, please contact BLACK+DECKER at the
following address.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BLACK+DECKER
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walshaertsstraat 14‑18
2800 Mechelen, Belgium
15.11.2019
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Random Orbit Sander
KA191EK
BLACK+DECKER declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑4:2014.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact BLACK+DECKER at the
following address.