Lenco Xemio-768 Guía Rápida página 4

into the player and the play function is selected.
3. Charging the battery
• Make sure that your computer is turned on. Connect the player to the
computer by using the included USB cable. The computer will detect
and install the driver automatically. Once the installation is complete,
the player will be displayed as device in "My Computer" or for MAC
users on the desktop.
• When connected to a computer, the player will charge automatically. It
will take 2 ~ 3 hours to fully charge the battery. During charging it's
possible to up- download files to the inserted Micro SD card.
Warning:
Better use the original USB cable delivered with your MP3 player. This
cable is a data and charging cable. Some other USB cables in the market
are charging only cables. If you use a charging only cable to transfer data
from your computer to your player, it will only show the battery symbol
on the screen and will not be detected by your computer as an external
drive; this means that you cannot transfer any files from your computer
to your MP3 player.
Note :
The player contains a built-in temperature monitor sensor. If it detects
that the battery pack temperature is not within acceptable values, it will
control and stop the charging function. The charging function will
automatically restart when the detected battery pack temperature
returns to delete normal limits.
4. Turn ON / OFF the player and use of Main Menu:
• Press and hold the
You will see one of the following Menu screens "Bluetooth / Music /
Movie / Record / Picture / Setup / eBook"
• Select your desired menu function by using the
button.
• Press the M button to enter the sub menu of that function.
• To return to the previous screen, press the
• Adjust the volume level by pressing the
• To turn OFF the player, press and hold the
button for 3 seconds to turn the player "ON",
4
/
button.
/ button.
button for 3 seconds.
and M
,