Safety Warnings - Senco FN81T1 Manual De Instrucciones

explosion Hazard
Never use tool in an explosive atmosphere or in the presence of combustible materials such as flammable liquids,
gases or dust.

saFeTy WarNiNgs

WARNING
Personal Protective equipment
Use safety equipment. Always wear ANSI Z87+ safety glasses with permanently attached
side shields. Dust mask, non-skid safety shoes, hard hat, or hearing protection must
be used for appropriate conditions. Failure to do so could result in personal injury. Eye
protection equipment must be worn by the operator and other people in the work area.
Employer is responsible to enforce the use of personal protective equipment by the tool
operator and all other personnel in the work area.
Eye protection shall conform to the requirements of ANSI Z87+ and shall provide protec-
tion against flying particles both from front and side.
Hearing protection shall have Noise Reduction Rating determined in accordance with US
Environmental Protection Agency Rules that is appropriate for the noise exposure.
Head protection shall conform to ANSI Z89.1.
Hazardous
Never use oxygen, carbon dioxide or any other bottled gas as a power source for
this tool; the tool will explode and cause serious injury.
Hazardous power sources shall not be used. Explosion may occur.
Hazardous power sources include, but are not limited to:
1. Reactive gases including, but not limited to oxygen and combustible gases.
2. Pressure sources that can deliver in excess of 1.5 times the maximum
air pressure of a tool or 200 psig (13.8 bar), whichever is greater, if a
regulator fails.
Read and understand tool labels and manual. Failure to follow
warnings will result in DEATH or SERIOUS INJURY.
Save These Instructions.
3