Safety Warnings For Cordless Impact Wrench - Truper LIMI-20A Manual De Instrucciones

Safety Warnings for
cordless impact wrenchs
Batteries and Charger
DANGER • Use only the included
charger to charge the tool battery. Using any other charger
may result in fire or risk of injury.
DANGER • Use only batteries designed specifically
for the tool. Other batteries may create a risk of injury or
fire.
• Connect the charger to an alternating current (AC)
supply only.
• Do not use the charger outdoors.
DANGER
• Observe "+/-" polarity when charging.
• Never recharge a leaking battery.
• Do not use batteries or the charger for purposes other
than those for which they were designed.
• Do not modify the contacts of the battery or the charger.
• Never expose the batteries to temperatures above 122 °F
• Never expose batteries to fire, they
DANGER
could explode.
CAUTION • The batteries must be kept away from
any metallic object such as paper clips, coins, keys, nails,
screws or any other object that could cause the terminals
to make contact; it could cause a short circuit that could
cause burns or fire.
CAUTION • Under extreme conditions, battery fluid
may leak. If so, avoid any contact. If accidental contact
occurs, wash with abundant water, rinse with lemon juice
and vinegar. If the liquid enters in contact with the eyes,
wash with abundant water during several minutes and
look for medical help immediately. Liquid ejected from the
batteries could cause irradiation or burns.
CAUTION • To maximize battery life, fully discharge
the battery at least once a month. Do not leave the battery
uncharged for more than three months. Always charge the
battery to its maximum capacity. Before using the machine
for the first time, charge the battery for a minimum of 3
hours.
• Avoid stopping constantly while screwing to avoid
damage to the battery.
Choose the appropriate accessory
CAUTION • Choose the appropriate die for the
material to be worked, this reduces the risk of serious
injury and speeds up the work.
• Do not attempt to use dies that exceed the capacity of
the frame.
• Only use impact dies.
Before operating the tool
• Take your time to evaluate the work to be done and
make sure you have observed all the necessary
precautions before you start screwing.
• Adjust the accessory correctly.
DANGER • Make sure the switch is in the OFF
position before inserting the battery, otherwise the battery
will start to operate unexpectedly and may cause serious
injury.
• Use auxiliary handles, if provided with the tool. Loss of
control may cause personal injury.
When operating the screwdriver
CAUTION
• This tool is designed to operate with
die. IT IS NOT A DRILL.
• This is a light duty tool; it should not be used to remove
or install screws requiring high torque.
• Do not attempt to modify the tool or its accessories in
any way.
• Turn the impact wrench on after installing the die.
• Do not use excessive force.
• Do not use this tool with only one hand.
• After each use, remove the dice and extensions and
store them properly.
Choking hazard! Children can swallow
WARNING
small parts and suffocate. Keep children away from small
parts.
Hold the power tool by the insulated gripping
surfaces when performing an operation where the
fastener may contact hidden wires or its own
power cord.
• Fasteners that come in contact with an energized cord
can make the metal parts of the power tool live and, as a
result, cause an electric shock to the operator.
• Use ear protectors when performing services that make
noises above 85 dB. Exposure to noise can cause hearing
loss.
• Use a dust mask and dust extraction equipment if
necessary. Remember that working with materials such as
asbestos, lead paints, additives, some types of wood,
metals or minerals is highly toxic.
• Wear safety goggles.
ENGLISH 5