General Safety Warnings For Pneumatic Tools - Truper TPN-883-2 Manual

Keep your work area clean, tidy and well lit.
CAUTION Cluttered and dark areas can cause accidents.
Never use the tool in explosive environments or in the
presence of flammable liquids or with no ventilation.
DANGER
Sparks generated by the tool could cause
explosion or fire.
Keep children and other people at a
safe distance while using the tool.
WARNING
Distractions can make lose control and cause accidents.
Avoid making contact with power lines and circuits.
DANGER
Place an avoid power lines and circuits especially
hidden wiring including grounded objects.
Stay alert, be cautious and use common sense.
CAUTION Familiarity with the use of the tool could distract you
while operating it. This can cause accidents.
Do not use the tool if tired or under the influence of
drugs, alcohol or medication.
DANGER
A moment distraction while using the tool can cause
severe personal injury.
Use the tool with all its parts in place and in good
repair.
WARNING
Failure to comply with this instruction can expose you to
severe injury.
Secure and support correctly the work piece .
CAUTION Use vices and a stable work surface.
Never force the tool.
CAUTION
Working within the range of the tool design
assures a better and safer job.
Store the tool in a safe place away from children reach.
WARNING
Pneumatic tools are dangerous in
inexperienced hands.
Wear the right clothing.
WARNING
Loose clothing, jewelry or long hair
can get caught in the moving parts.
Keep hands away from the moving and / or rotating
parts.
WARNING
Failure to comply with this warning expose you to
severe personal injury such as cuts, burns and
crushing.
4 ENGLISH
General Safety Warnings
for Pneumatic Tools
Wear the adequate personal protection equipment.
CAUTION
Use of eye protection, dust mask, anti-squid safety shoes,
and protection helmet and safety gloves considerably
reduce risk of injuries.
Disconnect the air hose from the tool before servicing or
changing accessoriess.
WARNING
To prevent the tool from accidentally starting up and
cause accidents.
Never use the tool if the switch is not working or if it is
not correctly assembled.
WARNING
Using the tool in disrepair expose you to severe personal
injury. Repair immediately in a
Authorized Service Center.
Do not overreach.
CAUTION
Good footing and balance allow having better control on the
tool in unexpected situations.
Never pull the air hose.
WARNING
Do not use the hose to carry the tool or disconnect it
from the air supply. Damaged or tangled hoses may
burst and shoot residues towards the operator.
Prevent accidentally starting the tool.
WARNING Double check the air intake is disconnected before
lubricating, setting accessories or servicing
the tool.
Remove all the vices before starting the tool.
Additional tools, or vices set onto a rotating piece in the
DANGER
tool may cause severe personal injury.
Service the tool and verify it is in excellent conditions
before using it.
CAUTION
Double-check carefully all the mobile parts, alignment
and assembly. Do this inspection regularly. Look for any
damaged element or malfunctioning part. Replace
immediately in a
Service Center.
Accessories.
CAUTION
Use only accessories or spare parts indicated in this
Manual or certified by
Never leave the tool running unattended.
CAUTION
Disconnect the tool from the air supply after operating
and before storing in a safe place to prevent accidents.
Authorized
.