Luvele LUMG700EU Instrucciones página 5

INSTRUCTION | P8
Features
BEFORE USING YOUR LUVELE MEAT GRINDER
Wash all attachments in warm soapy water using a mild detergent and dry thoroughly,
do not soak parts. Before you assemble the Meat Grinder ensure that the power cord
is unplugged.
NOTE: All attachments must be firmly in place before using the appliance.
!
WARNING:
Do not place any aluminium parts of the Grinder in a dishwasher, this
includes the hopper plate, fixing ring and head.
!
WARNING:
Do not soak any aluminium parts of the Grinder. Wash by hand in warm
soapy water and thoroughly dry immediately.
!
WARNING:
Do not place any parts of the Grinder in a microwave oven.
Reverse Mode
Use the reverse mode if there is a blockage. If the Meat Grinder is in operation then
turn control dial to the stop position, wait for 30 seconds, then turn the control dial to
'Reverse' setting to clear blocked food.
IMPORTANT: Do not select the reverse button while the Meat Grinder is in
operation. The motor must have completely stopped. Once the blockage has been
cleared, unplug the appliance and clean out remaining food from the head of the
Meat Grinder.
Half Mode
Half mode is used when a slower grinding speed is required. Recommended for
sausage and kibbe making.
IMPORTANT: Do not operate Meat Grinder for more than 10 minutes at a time. Allow
motor to cool for 20 minutes after 10 mintues of operation.
The appliance is not designed for commercial or industrial use; it is for household use
only.
BASIC ASSEMBLY STEPS
1
Insert head into body of grinder
3
Place grinding screw into head
5
Place cutting plate into head
7
Place hopper plate on head
INSTRUCTION | P9
Operation
2
Screw fasten button into place
4
Place blade onto grinding screw
6
Screw fixing ring on