Luvele LUMG700EU Instrucciones página 6

INSTRUCTION | P10
Operation
MINCING MEAT
S T E P
1
Place the Meat Grinder body, facing you on a level, dry surface.
S T E P
Fit the grinding screw inside the head.
2
Fit the blade over the grinding screw ensuring that the flat side of
S T E P
3
the blade faces the cutting plate, away from the grinding screw.
S T E P
Fit the cutting plate (depending on the type of mince you require).
4
The fixing ring then fits over the cutting plate and screws into
S T E P
5
place.
Align the head into the grinder body. Screw the fasten button into
S T E P
6
place.
!
The head can be fixed into the grinder body prior to the accessories being
attached if desired and as shown on page 9.
S T E P
Before use, ensure all elements are securely in place.
7
S T E P Place a bowl underneath the fixing ring for mince collection and
8
the hopper plate on top of the head.
NOTE:
S T E P Place prepared meat into the hopper plate. Plug the power cord into a 230-
9
240V AC power outlet and turn control dial to the ON position.
S T E P
Using the food pusher, gently push meat through the head.
10
!
Do not use excessive force to push meat through the head as it could
damage the appliance.
!
IMPORTANT:
Do not turn on the grinder without having meat ready to process
in the hopper plate. When minced meat stops flowing out of the cutting
plate, switch off the grinder immediately. The grinder should never be
running without meat being processed through it.
S T E P
When grinding is complete, turn the dial to the off position to stop grinder.
11
Fig. 1
INSTRUCTION | P11
Operation
NOTE: