koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 25

Operations
CHANNEL IS A SELECTING CHANNEL NUMBER AND SETTING ITS PARAMETERS - Chn1 (Chn2)
Press MENU.
Use the +/– buttons to select the desired
channel «Chn 1» or «Chn 2».
Select channel 1 or 2 and confirm with OK.
Use the +/– buttons to select the required
parameter. To enter the required parameter,
press OK. Return to main menu by pressing
MENU.
ATTENTION!
Before further configuration, configure the type of each channel (see section 6 SYSTEM SETTINGS).
4. CONFIGURATION OF CHANNEL 1 IN THE «ASTRONOMIC PROGRAM» MODE
In the menu for setting the channel parameters,
use the +/– buttons to select the «mod» mode
setting mode.
Confirm OK.
Confirm OK.
Pressing MENU again will return to the main
menu.
ATTENTION!
Changing the position of the contacts in the MANUAL OPERATION mode is carried out with the
«+» (for the first channel) and «-» (for the second channel) buttons in the main position (clock
mode).
If the channel is weekly, then in the absence of program records, the time relay will automatically
switch over to the MANUAL OPERATION mode (there is no possibility to set the AUTOMATIC
OPERATION mode).
* SEMI-AUTOMATIC OPERATION - the mode is switched on or off using the «+» (for the first
channel) and «-» (for the second channel) buttons in the main position (clock mode).
Adjusting the sunrise-sunset time is necessary to shift the lighting on / off time required to adjust to a specific area (height,
building density, and other parameters that affect the illumination.
For example:
If, according to the astronomical program, sunrise occurs at 5:00, and sunset at 22:00, then when using the sunrise correction
by +30 minutes, and the sunset by -20 minutes, the lighting will turn off at 5: 00 + 30 = 5: 30, and will turn on 22: 00-20 = 21: 40.
Each day of the week has its own memory cell that stores the set correction.
In the menu for setting the channel parameters,
use the +/– buttons to select the mode of setting
the correction of the sunrise-sunset time
«Corr».
Confirm the selection with the OK button.
Use the +/– buttons to select the day for which
the correction is to be set.
Confirm with OK.
Use the +/- buttons to set the required value.
Result provides buttons
The time relay will go to the programming
menu.
The following parameters are available
depending on the set channel type:
- for astronomical - operating mode, night
break, sunrise/sunset correction, annual
programs.
- for weekly - working mode, adding a
program, editing a program, deleting a
program.
4.1. Mode of operation - mod
The time relay switches over to the operating
modes menu. MANUAL OPERATION -
«hAnd», AUTOMATIC OPERATION -
«auto».
The time relay will automatically exit the
function of setting the operating modes and
switch over to the channel programming
menu.
4.2. Sunrise-sunset time correction setting - Corr
The time relay switches to the selection of
the day for which the correction needs to be
made:
- single days of the week: Mon; Tue; Wed;
Thurs; Fri; Sat or Sun;
- working days: Mon; Tue; Wed; Thu; Fri
(Monday to Friday);
- weekend: Sat; Sun (Saturday and
Sunday);
- daily: Mon; Tue; Wed; Thu; Fri; Sat; Sun
(Monday to Sunday).
The time relay will switch to adjusting the
sunrise time.
5
Display indication
Mo T T F S S
W
U E H R A U