koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 26

Operations
Confirm OK. Use the +/- buttons to set the
desired value.
Confirm OK.
To switch over to the programming menu, you
must wait 30 seconds or press MENU.
The night break function is designed to turn off the lighting at a set time for the required duration.
For example: it is necessary in the period from 2:00 to 6:00 on weekdays it was turned off, then you can set a night break on
weekdays at 2:00 for 4 hours and for this period the lighting will be turned off. Each day of the week has its own memory cell that
stores the set night break.
In the channel parameters setting menu, use
the +/– buttons to select the «niGh» night break
time setting mode.
Confirm the selection with the OK button.
Use the +/– buttons to select the day for which
the night break is set.
Use the +/- buttons to select the required days
(day) and confirm with the OK button.
Use the +/- buttons to set MINUTES, press OK,
then HOURS.
Use the +/- buttons to set MINUTES, press OK,
then HOURS.
Press OK. To complete the setup and exit to the
programming menu, press MENU.
The annual program is designed to forcibly turn on / off the lighting on a specific date, has priority over the astronomical and night
break program, it is executed regardless of the current state of the relay.
Adding an annual program
In the channel parameters setting menu, use
the +/– buttons to select the «ProG» annual
program setting mode.
Confirm with OK.
Confirm with OK.
Use the +/– buttons to set the desired value.
Result provides buttons
The relay will automatically switch to
adjusting the entry time.
4.3. Setting the night break time - niGh
The time relay switches to the selection of
the day for which you want to set the night
break:
- single days of the week: Mon; Tue; Wed;
Thu; Fri; Sat or Sun;
- working days: Mon; Tue; Wed; Thu; Fri;
- days off: Sat; Sun;
- daily: Mon; Tue; Wed; Thu; Fri; Sat; Sun/
The time relay will switch to setting the night
break start time.
The time relay will switch to setting the
duration of the night break, first minutes, then
hours.
The time relay will suggest setting a night
break for the next day.
4.4. Annual Program - ProG
The indicator will display the mode of adding
programs «Add».
Next, the time relay will offer to select a cell
from among the free ones for recording a
new program.
6
Display indication
ON
OFF
ON
OFF
Mo T W T F S S
U E H R A U
Mo
OFF
Mo
OFF
Mo
Mo