koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 30

Operations
In the menu for setting channel parameters, use
the +/– buttons to select the mode of deleting
the on-off program «dEL».
Confirm with OK.
Select the cell to remove programs and confirm
with OK.
Confirm with OK.
Pressing MENU while the number is flashing
will cancel the deletion.
- Press MENU.
Use the +/– buttons to select the «SYSt»
system setting mode.
Confirm OK.
Use the +/- buttons to select the settings and
confirm with OK. Pressing MENU will switch to
the highest level.
Confirm OK. Use the +/- buttons to select the
channel operation mode.
Confirm OK. Use the +/- buttons to select the
channel operation mode.
Confirm OK. Press +/- to select mode:
* with AUTOMATIC TIME CHANGE - «auto»;
* without AUTOMATIC TIME CHANGE - «off».
5.4. Removing the on-off program - dEL
The relay switches to the mode of selecting
the memory cell number. The number of the
first used memory location is automatically
displayed.
The time relay will go into standby mode to
confirm deletion.
Signaled by constant flashing of the selected
cell number.
The cell will be deleted. The time relay will
light up the next number of the programmed
cell. After deleting all programmed cells, the
indicator will display three horizontal lines.
6. SYSTEM SETTINGS - SYSt
The time relay goes to the programming
menu.
The time relay switches to the system
settings submenu (chr1 – chr2 – dSt –
CAL – LCd – CLEA – inFo).
6.1. Selecting the operating mode of channel 1 - chr1
AStr - the channel is configured to work in
the astronomical relay mode.
trEL - the channel is configured to work in the
weekly timer mode.
6.2. Selecting the operating mode of channel 2 - chr2
AStr - the channel is configured to work in
the astronomical relay mode.
trEL - the channel is configured to work in the
weekly timer mode.
6.3. Automatic time change - dSt
The time relay will switch to the auto-off
mode menu of altering time (auto – off).
Result provides buttons
10
Display indication