koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 28

Operations
Deleting an annual program
Press MENU.
Use the +/– buttons to select the «ProG»
annual program setting mode.
Confirm with OK.
Confirm with OK.
Confirm with OK.
Use the +/– buttons to select the program to be
deleted.
Confirm with OK.
To exit to the main mode press MENU.
In the menu for setting channel parameters, use
the +/– buttons to select the mode of setting the
modes «mod».
Confirm OK.
Confirm OK.
Pressing MENU again will return to the main
menu.
ATTENTION!
Changing the position of the contacts in the MANUAL OPERATION mode is carried out with the
«+» (for the first channel) and "-" (for the second channel) buttons in the main position (clock
mode).
If the channel is weekly, then in the absence of program records, the time relay will automatically
switch over to the MANUAL OPERATION mode (there is no possibility to set the AUTOMATIC
OPERATION mode).
* SEMI-AUTOMATIC OPERATION - the mode is switched on or off using the «+» (for the first
channel) and «-» (for the second channel) buttons in the main position (clock mode).
- In the channel parameters setting menu, use
the +/– buttons to select the "Add" on-off
program setting mode.
Confirm OK.
Select the cell number from the number of free
ones using the +/- buttons.
The time relay will go to the programming
menu.
The indicator will show the mode of deleting
programs «dEL».
The time relay will offer you to select a cell
from the programmed ones to delete the
program.
The program number will start flashing.
Then the product will suggest deleting the
next programmed program. The appearance
of the indication «P ---» on the indicator
indicates that all programs have been
deleted and in a second the time relay will go
to the menu for setting the annual program.
5. SETTING CHANNEL 2 IN THE «WEEKLY PROGRAM» MODE
5.1. Mode of operation - mod
The time relay switches to the operating
modes menu. MANUAL OPERATION -
«hAnd», AUTOMATIC OPERATION -
«auto».
The time relay will automatically exit the
function of setting the operating modes and
switch over to the channel programming
menu.
5.2. Add on-off program - Add
The relay switches to the mode of selecting
the memory cell number. The number of the
first free memory location is automatically
displayed.
Result provides buttons
8
Display indication