NEO STEAM 1500 RGBA Manual De Usuario página 16

9. MAINTENANCE
Before doing maintenance, please make sure that
the power is cut, the power cord is unplugged, and
the machine itself has cooled down. The mainte-
nance must be done by qualified person.
• The fog liquid is not allowed to get dirty. Be
sure to always clean or replace the caps on the
fog liquid vessel and tight the cover of the fog
machine liquid tank immediately after filling.
• Periodically check the connecions among
the oil tube, the pump and the heater to see
if there's oil leaking. If positive, lock tight the
connections carefully with proper tool.
• PC board should be kept from being dirtied
with oil. In case this happened, dismantle care-
fully the PCB, and have it brushed clean both
sides with dilute alcohol. Leave it dry itself,
then install it back. Make sure all wires are well
connected.
• Clean the metal cover with dry cloth.
P. 16
Neo Steam 1500 RGBA -
English version