Garland ROLL&COMB KEEPER 602-V23 Manual De Instrucciones página 32

English
To mount the upper handlebar:
• Place the upper handlebar (3) on the lower
handlebar (2) and insert a long screw (6).
• On the other side, insert a washer (7) and screw in
the wing nut (5).
• Repeat the operation on the other side of the
handlebar. Secure the cables with the clips (10).
6.3. INSTALL THE COLLECTION BAG
Place the collection bag (4) in the machine hooking
the hooks in the holes marked with a circle. To do this,
hold the bag by the handle with your right hand, raise
the safety hatch with your left hand as far as possible
and hook the bag.
6.4. START-UP
6.4.1. CHECK POINTS BEFORE START-UP
Do not use this machine if it is damaged or incorrectly
adjusted.
Use this machine for the purpose for which it was
designed. Any other use may be dangerous for the
user, for the machine and for people, animals and
things that may be around.
Check:
• The machine completely and look for parts loose
(bolts, nuts, etc.) and damage.
• That the moving parts of the machine are not in
contact with any object.
• Tighten, repair or replace everything necessary
before using the machine.
32/104