INSTALLATION INSTRUCTIONS
IMPORTANT! If you are mounting the faucet to an uneven surface (such as tile grout lines), apply a suitable
sealant in addition to the O-rings and gasket provided. Do not use petroleum based sealant.
Slide an escutcheon and O-ring over each of the hoses and onto the faucet.
Insert the faucet through the mounting surface with the cold supply hose to the right side of the user.
Assemble a bracket, washer, and nut to each stud from underneath the mounting surface.
Securely tighten the nuts with an adjustable wrench.
Ensure the handles are in the OFF position, as shown.
1506281-2-A
3 of 11
INSTALL THE FAUCET
Stud
Escutcheon
O-Ring
Sink/Countertop
Hot Supply
Bracket
Washer
Nut
Bridge Kitchen Faucet
Cold Supply
Optional Sidespray
Hose Outlet
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Deck-Mount