KALLISTA P25001-00 Instrucciones De Instalación página 4

INSTALLATION INSTRUCTIONS
CAUTION: Risk of restricted water flow and product damage. Use extreme care to avoid kinking and
twisting the supply hoses. The supply hoses must not be taut after installation.
NOTE: If the sink installation requires that you coil the supply hoses to obtain a good connection, maintain an inside
coil diameter of at least 3" (7.6 cm).
NOTE: DO NOT remove the plug from the optional sidespray supply outlet unless you are installing the optional
sidespray.
‰ Carefully position the hot and cold water supplies so they will not interfere with other hoses or items below
the mounting surface.
‰ Connect and tighten the supply hoses to the supply stops. Left is hot, right is cold.
‰ Verify that all connections are tight and the handles are in the OFF position.
‰ Turn on the main water supply.
‰ Check all connections for leaks. Repair as needed.
‰ Turn both handles to the ON position and allow the water to run through the spout to remove any debris.
‰ Turn both handles to the OFF position.
NOTE: If water flow is restricted: Using the aerator tool (provided), turn the aerator clockwise to remove it from the
spout, remove the debris, then reinstall the aerator. DO NOT overtighten. Retain the aerator tool for future use.
1506281-2-A
4 of 11
INSTALL THE SUPPLIES
3" (7.6 cm)
or Larger
Hot
INSTALLATION CHECKOUT
Aerator
AeratorTool
Bridge Kitchen Faucet
Optional Sidespray
Supply Outlet
Cold
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Deck-Mount