Using The Appliance; Switching On/Off; Battery Charge Level - Parkside PTSA 12 A1 Traducción Del Manual De Instrucciones Original

1. To remove the battery pack 3, press the release button 4 and pull the
battery pack 3 out of the appliance.
2. Insert the battery pack 3 into the high-speed battery charger 7.
3. Insert the power plug into the socket. The control LED 5 lights up red .
4. The green charge level indicator LED 6 indicates that the charging
process is complete
5. Push the battery pack 3 into the appliance.

Using the appliance

Never use the appliance for purposes other than those for which it was
designed, and only use original parts/accessories. Using attachments or
accessory tools other than those recommended in the operating instructions
can lead to a risk of injury.
Switching on/off
Switching on
♦ Press the On/Off switch 2. The appliance lights up at maximum
brightness.
Switching off
♦ Press the On/Off switch 2.

Battery charge level

■ The status will be shown on the battery display LED 1 as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
PTSA 12 A1
and the battery pack 3 is ready for use.
GB │ IE │ 11 ■