Installation - Klarstein BAROLO 12 UNO Manual De Instrucciones

INSTALLATION

Before first use
Let the unit stand for 24 hours before first use to allow the coolant to disperse. Leave the
door open during this time to allow production-related odours to dissipate.
Note: All models without front ventilation or ventilation slots on the front are not built-
in appliances and must be free-standing.
Location
The place where you place the unit should:
• be resilient and well ventilated.
• be away from direct sunlight and heat sources.
• not be too damp, such as bathrooms or washrooms.
• have a level floor.
• have a standardised electrical connection.
• have a socket outlet with overvoltage protection.
• be far away from microwaves, as their interference could have a negative effect on
the unit.
Furthermore, the ambient temperature in the room should be neither very cold nor very
warm. Cold and heat can possibly have a negative effect on the function, so that the
desired interior temperature is not reached.
Setting up
• Remove all packaging material from and around the refrigerator.
• Position the refrigerator so that the plug is accessible at all times. Disconnect the
mains cable and place the unit in its final location. Place it so that the compressor is
free and not in contact with other objects or walls.
• Level out any small unevenness in the floor before filling the unit. Use the adjustable
feet for this purpose. To do this, turn the back feet completely in and compensate for
the slant with the front two feet.
EN
27