Control Panel And Button Functions - Klarstein BAROLO 12 UNO Manual De Instrucciones

CONTROL PANEL AND BUTTON FUNCTIONS

You can turn the interior light on or off with a single press of the button.
The light switches off automatically if left on for 10 minutes. Press
the button again and the light switches on again. You can switch the
temperature display from Celsius to Fahrenheit by pressing and holding
the button for 2 seconds.
Your refrigerator is equipped with an automatic control panel lock that
is activated 20 seconds after the last time a button is touched. Press the
button for 2 seconds to unlock the control panel. You will hear a beep
indicating that the control panel is now active.
In addition, you can turn the interior light on or off by pressing the button.
The light switches off automatically if left on for 10 minutes. Press the
button again and the light switches on again.
You can adjust the temperature as desired by pressing the UP or DOWN
button on the control panel. The temperature that increases by 1°C when
you press the HIGH button once. The temperature that decreases by 1°C
when you press the DOWN button once.
Note: When you use the refrigerator for the first time or switch it on again after a long
time, there may be a deviation of a few degrees between the temperature you have
selected and the temperature shown on the LED display. This is normal and is related
to the length of the switch-on time. When the refrigerator has been in operation for a
few hours, everything is back to normal.
EN
31