B-190Tbpl - Optika Italy B-190 Serie Manual De Instrucciones

7.1.2

B-190TBPL

1. Remove the dust cap from the microscope frame and from
the bottom of the observation head.
2. Insert the optical head above the stand and tighten the
screw. (Fig. 5)
• Hold the head with one hand during the locking in order
to avoid that the head falls.
3. Insert both eyepieces into the tubes of the optical head. (Fig.
6)
4. Insert the power supply jack in the socket placed at the rear
side of the microscope. (Fig. 3)
5. Fix the rotating part of the junction using the black wing-nut
. (Fig. 7)
①
6. Then hook the Tablet PC onto the 4 screws of the junction
and pull toward down to firmly lock the Tablet PC in the hold-
er. (Fig. 8)
• To unlock the Tablet PC proceed with the opposite operation:
push toward up and remove it from the holder.
Page 9
F ig. 5 F ig. 5
F ig. 6 F ig. 6
①
F ig. 7 F ig. 7
F ig. 8 F ig. 8