Assembly
1. Unpack the Cotton Candy Maker from the box.
2. Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
3. Wipe clean all the parts with a soft damp cloth or sponge and warm water.
Rinse and dry thoroughly. DO NOT IMMERSE THE COTTON CANDY MAKER
BASE IN WATER OR ANY OTHER LIQUID.
NOTE: Do not put any parts or the base in the dishwasher.
4. Using a damp cloth or sponge, wipe the cotton candy maker base. Dry
thoroughly, with a soft cloth.
5. The Cotton Candy Maker comes assembled; however, the bowl and
protective guard will need to be attached. To attach the bowl, carefully
place the bowl over the sugar receptacle and turn it counterclockwise until
it locks into place. Then attach the protective guard to the bowl by carefully
snapping it into place.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE
DO NOT IMMERSE THE COTTON CANDY MAKER BASE IN WATER AT ANY TIME
4
Assembly