User instructions
The cotton candy maker may produce an odor and emit smoke when switched on
for the first time, as residues from the production process are eliminated. This is
normal and does not indicate a defect or hazard.
Granulated or flossing sugar instructions
1. Place the cotton candy maker on a flat and stable surface near an electrical
outlet.
2. Make sure the cotton candy maker is turned to OFF and plug it into an outlet.
3. Turn to the ON position and allow to run for at least 3-5 minutes to allow the
unit to warm up. This allows the unit to properly warm up before beginning to
actually spin the cotton candy. Turn to OFF and only add sugar when it has
come to a complete stop.
4. Measure out 1 level tablespoon of sugar and pour it into the sugar receptacle.
The included spoon equals 1 tablespoon, so it may be used to measure the
sugar.
To add a little flavor and color, mix a pinch of your favorite pre-sweetened
Kool-Aid® to the sugar.
5. Turn the unit to the ON position.
6. When the cotton candy web begins, collect the cotton candy on the cone by
holding the cone vertically. Rotate the cone with your fingers while you circle
the bowl. Once cotton candy has collected on the cone, hold the cone in a
horizontal position over the extractor head, still rotating the cone with your
fingers. Continue turning the cone with your fingers while the cone is in the
horizontal position and move from side to side making sure you are collecting
all the cotton candy.
8
User instructions