RIB K500 FAST Instrucciones Para El Uso Y La Manutención página 23

K-CRX 230-50/60Hz
K-CRX 120-60Hz
ATTENTION
A - CONNECTIONS
J1=> DO NOT TOUCH THE JUMPER !
IF IT IS REMOVED THE OPERATOR DOESN'T MOVE !
J2=>
J3 =>
J4 =>
J5 =>
J6 =>
J7 =>
J8 =>
R1 =>
R2 =>
RELAYS AND MOTOR CONTROL
V.00 FAST
V.00 FAST
B - ADJUSTING THE MICROSWITCHES
OPERATION MICROSWITCHES
DIP 1 CHECKING THE ROTATION DIRECTION OF THE MOTOR (ON)
(POINT C)
DIP 2 TIMING (ON) (POINT D)
DIP 1-2 READ IN /CANCELLATION RADIO CODES FOR MOTOR CONTROL (DIP 1
ON FOLLOWED BY DIP 2 ON) (PUNTO E) ONLY FOR CRX MODELS
OPERATING MICROSWITC
H
(OFF)
(ON)
(ON -operated)
N.B.: Do not use the "strong version" of electronic brake with a gate
heavier than 500Kg
(OFF)
S1 =>
JP1 =>
JP3 => If it is closed the function black out is not active
If it is opened the function black out is active (see TAB1 pag.24).
TORQUE - ELECTRONIC TORQUE REGULATOR
NOTE: IN CASE THE ABOVE TRIMMER IS SET FOLLOWING THE PROGRAMMING
PROCEDURE, THE SLOWING STROKE STARTING POINT CAN CHANGE
(ANTICIPATING OR DELAYING THE SET VALUE), THEREFORE UPON A
NEW TRIMMER SETTING, A NEW TIME ADJUSTMENT IS RECOMMENDED.
LOW SPEED
SPEED ADJUSTMENT DURING DECELERATION
(ON)
(ON)
(OFF)
(ON)
(OFF)
(ON)
E
N
G
L
I
S
H
(OFF)