Unpacking Instructions; Introduction; Features And Benefits; Operation - Cuisinart ViewPro GK-17N Serie Manual De Instrucciones

UNPACKING
INSTRUCTIONS
1. Place the box on a large, sturdy, flat
surface.
2. Remove the instruction book and any
other literature.
3. Lift the power base from the box and
remove the polybag.
4. Remove the upper pulp molded insert.
5. Lift the kettle from the box and remove
the polybag.
We suggest you save all packing materials in
the event that future shipping of the machine
is needed. Keep all plastic bags away from
children.

INTRODUCTION

Your new Cuisinart
®
Electric Kettle features the latest technology
to make boiling water quicker and easier than
ever.
This kettle is exceptionally simple to operate,
but as with every new product, we suggest
you read the following information carefully to
familiarize yourself with the kettle's use and
care.
1.
3.
6.
7.
8.
9.
ViewPro™ 1.7 L Cordless

FEATURES AND BENEFITS

1. Lid
2. Lid with Release Button
For quick and easy filling.
3. User-friendly Spout (with Spout Filter)
4. Stay-Cool Handle
Ergonomically shaped for comfort.
5. Power ON/OFF Switch
Simply push down until "click" is heard to
begin the boiling process. Kettle shuts off
automatically once water has boiled. ON
indicator light illuminates when kettle is on.
6. Glass Body
7. Level Indicator
8. Body Base
Supplies power to kettle.
9. Cord Wrap (under base)
Unwind only as much as you need.
Provides convenient storage.
BEFORE USING FOR
THE FIRST TIME
Before using your Cuisinart
L Cordless Electric Kettle for the first time,
we recommend RINSING THE KETTLE
WITH THE MAXIMUM AMOUNT OF FRESH
WATER IT ALLOWS. BOIL FRESH WATER
2.
INSIDE THE KETTLE TWO TO THREE
TIMES AND DISCARD THE BOILED WATER
BEFORE NORMAL USE.
4.

OPERATION

1. Put the appliance on a
heat-resistant flat surface.
2. Lift the lid lever upward to open the lid.
3. Fill the kettle with the desired quantity of
cold water between the Min. and Max.
levels.
4. The kettle is equipped with a borosilicate
glass body. It is important to avoid
thermal shocks. Do not use iced water,
5.
especially if your glass kettle is still warm.
5. Close the lid until it locks.
6. Ensure the cable has been connected and
the ON/OFF switch is at the OFF position.
7. Press the ON/OFF switch to the ON
position. The power indicator will then be
illuminated.
4
ViewPro™ 1.7
®