Qian DAYIN 80 Manual De Usuario página 27

8: Now if you want to test if the printer is OK to print, you
could use a com tool , and send printed data to Outgoing
COM port( just as above image shown: COM5).
(Com tool setting is 9600,N,8,1.).
6. Ethernet IP Address Setting
According to the self-inspection page title selection me-
thod of IP Settings:
1. The 80 - III shall apply.
If print by Ethernet interface, the printer needs to be modi-
fied Mac, IP, subnet mask, gateway, we can do it online,
please check the steps as follows:
1.1, Connect the printer with computer by crossover ca-
ble, such as a router connection, printer and computer
are both connected to the router.
1.2, Press the "FEED" button while turn on the printer
power switch, and when "PAPER OUT" indicator light,
release the "FEED" button, the printer will be printed a
self-test page, then you can check the relevant infor-
mation of printer as below image shown:
27