Qian DAYIN 80 Manual De Usuario página 45

for repair.
7: Ethernet printer does not printer after linked with a
router.
A: Make sure the network cable and router port works
well, does the printer IP and router IP are on the same
network segment? Is the printer IP occupied by other
device ? We can modify the ip with the printer tools at-
tached in the cd disc. Or contact our service center for
help.
8: Messy code printing except Arabic numeral printing.
A: language switching incorrectly,please use the printer
tools attached in the CD disc. Then change the langua-
ge to "ASCII".
9: Malfunction of the auto paper cutting
A: if the cutter doesn't work, please check the printer
tools -Function Set - Cutter Set, and make sure the op-
tion is ON. Or contact the service center for help.
10: Red indicator keep flashing during the printing.
A: Usually it is due to the high temperature of the print
head. Just close printer for a while and let it cold down.
Or contact the service center for help.
11: Communication interrupts and can not print if many
printers work by Ethernet port at the same time.
A: First check the network to get the printer Ethernet ID,
to see if any conflicts of the Ethernet ID. Give a speci-
fied Ethernet ID to each printer to avoid this problem.
45