Qian DAYIN 80 Manual De Usuario página 32

7. WIFI IP Address Setting.
The setting parameters of 80 WIFI thermal printer can be
done by the browser configured, the steps as below:
1. Connect the printer with PC and switch on the printer.
2. Find the wireless network and link it. Then find the file na-
med" HF-LPB100" and link it – after successful connection ,
go to next step.
3. Enter the IP address ( 10.10.100.254 ) into the PC browser,
press Enter we can see as below:
Enter " admin" for the user name and default password is also
"admin". Press ok and then Next:
32