Basic Function Operation; Printer Operation - Qian DAYIN 80 Manual De Usuario

3.Basic Function Operation

3.1 Indicator Light & Printer Status
The printer has 3 Led Indicators( Power / Error and Paper
Out ),Power indicator will lights o n once power is plug-
ged in. And Error Led will lights on when any error arose (
Paper Out / Temperature is too high / mal-position of the
carriage unit on the print head ); We can press the "FEED"
button to test the paper feeding function if the power indi-
cator looks well.

3.2 Printer Operation

• Switch on: Ensure the adapter properly connected with the
printer, press the switch on the "1"position, printer turns on.
• Switch off: Press the switch on the other side "O".
• Paper Feeding: Press " FEED" button when powers on,
paper will keep running & stop to run when loosen this bu-
tton.
• Self Printing Test : Switch off the printer then press
"FEED" button and do not release. Press the "POWER"
button at the same time till the " PAPER OUT" indicator
on, release the button then we can read the current setting
from the test page.
• Hexadecimal printing:Power off the printer, press "FEED"
button & do not release, press "POWER" button at the
same time until the " PAPER OUT" indicator on, release
the "FEED" button about 3 seconds after the " PAPER
OUT" indicator off , then the printer run into Hexadecimal
printing model. The way to quit Hexadecimal printing mo-
del is just restart the printer.
7