Receive Data - Yamaha ProR3 Manual Del Propietário

2. Receive data

2-1 Channel information
#1 Note On
This message can be received on the currently selected MIDI channel.
If the MIDI Trigger parameter is ON, it will be received as a gate trigger.
When a pitch-type reverb program is selected, it will be received to control the pitch. The veloc-
ity value is ignored. If the Base Key parameter is OFF, the pitch will not be controlled.
STATUS
NOTE No.
VELOCITY
#2 Control Change
This message can be received on the currently selected MIDI channel.
When this message is received, it will control the parameter being modified by the correspond-
ing foot controller as specified by the Control Assign table.
STATUS
CONTROL No
CONTROL VALUE
#3 Program Change
This message can be received on the currently selected MIDI channel.
When this message is received, a program will be selected as specified by the Program Change
table of that bank.
STATUS
PROGRAM No.
2-2 System information
#1 Program bulk dump request
This message can be received on the currently selected MIDI channel.
When this message is selected, the program of the specified User program number will be trans-
mitted as bulk data.
STATUS
ID No.
SUB STATUS
FORMAT No.
DATA NAME
PROGRAM No.
EOX
1001nnnn(9nH)
0kkkkkkk
0vvvvvvv
1011nnnn(BnH)
0ccccccc
0vvvvvvv
1100nnnn(CnH)
0pppppp0
11110000(F0H)
01000011(43H)
0010nnnn(2nH)
01111110(7EH)
01001100(4CH)
01001101(4DH)
00100000(20H)
00100000(20H)
00111000(38H)
01000001(41H)
00111000(38H)
00110011(33H)
01001101(4DH)
0mmmmmmm
11110111(F7H)
MIDI data format
n=0-15
k=0-127
v=0-127
n=0-15
c=1-31, 64–95
v=0–127
n=0-15
c=0-127
n=0-15
"L"
"M"
Space
Space
"8"
"A"
"8"
"3"
"M"
m=1-90
ProR3 Digital Reverberator
Add-5