Operation Instructions; Setting The Clock; Express Cooking; Microwave Cooking - CORBERO CMICIG220 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 When the oven first plugged in, beep will sound and the display will show "
 In the process of setting, broke about 30 seconds the oven will return to standby mode.
 During cooking, if press STOP/CANCEL pad once, the program will be paused, then press
START/+30 pad to resume, but if press STOP/CANCEL pad twice, the program will be canceled.
 After cooking end, the screen will display End with sound every two minutes until user press
STOP/CANCEL pad or open the door.
S
ETTING THE CLOCK
This is a 12 or 24 hour clock. You can choose to set the clock time in 12 or 24 hour cycle by pressing the
CLOCK/PRESET pad in standby mode.
1.
In standby mode, press CLOCK/PRESET once or twice to select 12 or 24 clock.
2.
Turn TIME/WEIGHT to set hour digit.
3.
Press CLOCK/PRESET pad once to confirm the hour setting.
4.
Turn TIME/WEIGHT to set minute digit.
5.
Press CLOCK/PRESET pad once to confirm the setting.
NOTE: During cooking, you can check the current time of the clock by pressing CLOCK/PRESET pad.
E
XPRESS COOKING
Use this feature to program the oven to start at 100% power conveniently. In standby mode, press
START/+30 pad in quick succession to set the cooking time. The longest time can be set is 10 minutes.
The oven will start working automatically.
+30
S FUNCTION
During cooking, you can add cooking time by pressing START/+30 pad, each press for 30 seconds and
the longest time is 95 minutes.
NOTE: Only microwave, grill and combination cooking program can be used the function.
M
ICROWAVE COOKING
1.
In standby mode, press POWER LEVEL pad repeatedly to select power level.
2.
Turn TIME/WEIGHT clockwise to enter cooking time. The longest time is 95 minutes.
3.
Press START/+30 pad.
Select power level by pressing the POWER LEVEL pad:
Press POWER LEVEL pad
Once
Twice
3 times
4 times
5 times
6 times
NOTE: During cooking, the current power level can be seen by pressing POWER LEVEL pad.

Operation Instructions

Power(Display)
100%(100)
80%(80)
60%(60)
40%(40)
20%(20)
0%(00)
8
"and "1:01".

Publicidad

Tabla de contenido
loading

Tabla de contenido