Cleaning The Filter; Cleaning & Maintenance - Tristar DH-5424 Manual De Usuario

Instruction manual
solvents, as these can scratch and damage the tank and cause water
leakage.
• Place the drainage tank back into the appliance. When replacing
the drainage tank, press the tank firmly into place with both
hands. If the tank is not positioned properly, the "WATER FULL"
sensor will be activated, and the appliance will not operate.
Note: Do not remove the float from the water tank. The water full
sensor will no longer be able to detect the water level correctly
without the float and water may leak from the water tank.
CLEANING MAINTENANCE
• Before cleaning, be sure to disconnect the unit from any electric
supply outlet.
10
• First clean the surface with a neutral detergent and wet cloth, and
then wipe it with a dry cloth.
• Do not use gasoline or other chemicals to clean the unit.

CLEANING THE FILTER

• Unplug the appliance before cleaning.
• Open the filter covering and remove the filter.
• Gently vacuum clean the filter to remove any dirt. If the filter is
exceptionally dirty, wash it with warm water and a mild cleanser
and dry thoroughly.