Before The First Use; Parts Description - Tristar DH-5424 Manual De Usuario

Instruction manual
organization that ensures competence in
handling refrigerants according to a specific
evaluation recognized by associations in the
industry.
• Repairs must be performed based on the
recommendation from the manufacturing
company. Maintenance and repairs that
require the assistance of other qualified
personnel must be performed under the
supervision of an individual specified in the
use of flammable refrigerants.
(CE) N 842/2006: This unit contains the refrigerant R290. The amount
of refrigerant is less than 1kg, and is in a closed cooling circuit. The
coolant does have zero ozone depletion potential, but is a so-called
greenhouse gases under the Kyoto Protocol and may thus contribute
to global warming, if it is released to the atmosphere. Therefore only
trained technicians with refrigerant certificate make a filling or
emptying. Your appliance does not have be refilled with refrigerant if
used properly and has an undamaged coolant circuit. GWP: R290: 3
• WARNING: In order to avoid
overheating, do not cover the heater.

PARTS DESCRIPTION

1. Control panel
6
2. Air outlet louvres
3. Filter covering
4. Air filter
5. Drainage tank
6. Water outlet
7. Drainage hose

BEFORE THE FIRST USE

• Place the unit in the correct upright position before unpacking.
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
• Please ensure the unit is not placed against objects which will
obstruct air intake e.g. furniture or curtains as this will affect its
performance dramatically.
• Please don't place or operate the unit in a narrow place
• Do not place the unit in full sun as it might shut down due to
overheat and the color of the unit may soon fade out.
• A distance of 20cm minimum must be kept between the unit and
the wall or any other obstacles.