Activate The Kickscooter; Learning To Ride - Segway Ninebot KickScooter Manual De Instrucciones

5 Activate the KickScooter

There are safety risks when learning to ride the KickScooter. You must read the
Riding Safety via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep constantly after
Power ON.
Until activated, the Kickscooter is limited to 9.3 mph (15 km/h) and cannot be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.1 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate
your KickScooter and enjoy the full performance.
Segway-Ninebot App Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
Install the App and register/login.
1
Click "Vehicle"→"Search vehicle" to connect to
3
your KickScooter.
The KickScooter will beep when the connection
is successful. The Bluetooth icon will stop
blinking and remain illuminated.
Follow the App instructions to active the KickScooter and learn how to ride safely.
4
You can also check the vehicle's status in App, and interact with other users. Have fun!
07
Power on the KickScooter. A blinking
2
Bluetooth icon indicates the KickScooter is
waiting for a connection.
Vehicle Fans Moments Discover Me

6 Learning to Ride

Wear an approved helmet and other protective
gear to minimize any possible injury.
1. Stand on the baseboard with one foot
and push off with the other to start
gliding.
Note: Please check the power level. Charge the
scooter if the battery level is low.
2. Stand stably on the baseboard with both
feet. Press the throttle to speed up when
you are balanced.
Note, For your safety, the motor will not
engage until the scooter reaches 1.86 mph
(3 km/h).
08