Operating The Device Safely; Scope Of Delivery; Accessories; Target Group For This Manual - Dometic WAECO SinePower MSI 924M Instrucciones De Montaje Y De Uso

MSI924M
2.3

Operating the device safely

WARNING!
!
 Operate the device only if you are certain that the housing and
the cables are undamaged.
 Even after the fuse triggers, parts of the inverter remain live.
 Always disconnect the power supply when working on the de-
vice.
NOTICE!
A
 Make sure the air inlets and outlets of the device are not cov-
ered.
 Ensure good ventilation. The inverter produces dissipated heat
which has to be diverted.
 Do not connect the 230 V output of the inverter (fig. 5 5,
page 4) to a different 230 V source.
3

Scope of delivery

No. in
fig. 1, Designation
page 3
1 Sine wave inverter
– Operating manual
4

Accessories

Designation
Remote control
5

Target group for this manual

The electrical installation (chapter "Connecting the inverter" on page 38) is
intended for professionals who are familiar with the applicable regulations of
the country in which the equipment is to be installed and/or used.
EN
Item no.
MCR9M
Scope of delivery
33