Special Functions; Warning Messages - Qilive Q.5538 Manual De Instrucciones

SPECIAL FUNCTIONS

For quick breads
1.
Quick breads are made using baking soda or baking powder that is activated by moisture
and heat. For perfect quick breads, pour the liquids into the bread pan first and then
place the dry ingredients on top. During the initial mix, the dry ingredients may collect in
the corners or bottom of the bread pan. Use a rubber spatula to incorporate them into
the ingredients and prevent lumps.
2. For ultra-fast programs
The bread maker can bake bread in 98 minutes using programs
and
lb bread while Ultra Fast 2 is for baking 1.5 lb bread. The water must be hot, between
48°C and 50°C. Use a thermometer to check the temperature. If the water temperature
is too low the bread will rise poorly, if it is too high, the yeasts will be killed and again the
bread will not rise.
MEMORY
If the power supply is interrupted for less than 10 minutes during cooking, the program will
automatically continue when the power supply returns. If the power supply is interrupted
for more than 10 minutes, the memory function may not hold, and the bread maker must
be restarted. However, if the dough is still in the kneading phase when the power is off,
you can press the
ENVIRONMENT
The bread maker works well in a wide range of temperatures. However, the final loaf size
may vary if the bread is baked in a very warm room or very cold room. We suggest that
the room temperature should be between 15°C and 34°C.

WARNING MESSAGES

The following warning messages may appear after you press the
program:
Message
. The bread is denser in texture. Ultra Fast 1 is for baking 2.0
button to resume the program from the beginning.
Meaning
The appliance is too hot. Stop the program and allow
the appliance to cool for 10-20 minutes.
The temperature sensor is disconnected. Take the
appliance to an authorized repair agent.
Five beeps will sound to alert you that the appliance's
internal temperature is too low. This can happen if
the appliance has been stored in an airconditioned
room or cold storage. Press the
program, open the lid and for 10 to 20 minutes let the
appliance warm up to a normal room temperature.
Alternatively, select the
rapidly increase the appliance's internal temperature.
11
button to start a
button to stop the
program to
EN