Selecline 600103444 Manual De Utilización página 10

Levelling the appliance
To level the freezer, adjust the 2 adjustable feet on the opposite side of the compressor
(ventilation), as illustrated. Turn the adjustable feet clockwise or anti-clockwise as
required, until the freezer is levelled and in firm contact with the floor.
NOTE: Proper levelling of the appliance prevents excessive noise and vibration.
Positioning
■ Install the freezer on a hard and flat floor.
■ It is forbidden to use the freezer outdoors.
■ Install this appliance at a location where the ambient temperature corresponds
to the climate class indicated on the rating plate of the appliance. This ensures
the correct operation of the appliance.
Climate class
Extended temperate
Temperate
Subtropical
Tropical
■
WARNING: RISK OF ELECTRIC SHOCK! Protect the appliance from moisture.
Do not install the freezer in a humid place to avoid rust on the metal parts.
Do not splash water on the interior or exterior of the freezer, as this may weaken
the insulation and result in an electric shock or fire.
■ If the freezer is installed in unheated areas, garages etc., in cold weather
condensation may form on the outer surfaces. This is quite normal and is not a
fault. Wipe off any condensation with a dry cloth.
■ When positioning your appliance take care not to damage your flooring, pipes,
wall coverings, etc. Do not move the appliance by pulling by the lid or handle. Do
not allow children to play with the appliance or tamper with the controls.
■
WARNING! Make sure that the power plug is easily accessible after the
installation of the appliance.
10 m
Symbol Ambient temperature range
SN
N
ST
T
10
10
From 10 °C to 32 °C
From 16 °C to 32 ⁰C
From 16 °C to 38 ⁰C
From 16 °C to 43 ⁰C