Safety information
•
Unpack the appliance and check if there are damages
on it. Do not connect the appliance if it is damaged.
Report possible damages immediately to the place
you bought it. In that case retain packing.
•
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back
in the compressor.
•
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation follow the instructions relevant to installation.
•
Wherever possible the spacers of the product should be
against a wall to avoid touching or catching warm parts
(compressor, con-denser) to prevent possible burn.
•
The appliance must not be located close to radiators
or cookers.
•
Make sure that the mains plug is accessible after the
installation of the appliance.
Service
•
Any electrical work required to do the servicing of
the appliance should be carried out by a qualified
electrician or competent person.
•
This product must be serviced by an authorized
Service Center, and only genuine spare parts must
be used.
Energy saving
•
Don't put hot food in the appliance;
•
Don't pack food close together as this prevents air
circulating;
9 9
EN