Venta AW902 Manual De Instrucciones página 5

SAFET Y PRECAUTIONS
FOR INSTALL ATION / WARNING
∙ Plug the power cord into a wall socket with the power specifications of the product
or higher and use the socket for this appliance only. In addition, do not use an
extension cord.
Sharing a wall socket with other appliances using a multi outlet power strip or
➔
extending the power cord may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
➔
If the voltage/frequency/rated current condition is different, it may cause electric
➔
shock or fire.
FOR INSTALL ATION / WARNING
∙ Do not install this appliance near a heater, inflammable material. Do not install this
appliance in a humid, oily or dusty location, in a location exposed to direct sunlight
and water (rain drops). Do not install this appliance in a location where gas may leak.
Failure to do so may result in electric shock or fire.
➔
FOR INSTALL ATION / CAUTION
∙ The appliance should be installed in a place where the power cord of the product
can be easily pulled out.
Failure to do so may result in electric shock or fire due to electric leakage.
➔
∙ Install your appliance on a level and hard floor that can support its weight.
Failure to do so may result in abnormal vibrations, noise, or problems with the product.
➔
∙ There should be over 6 in. space around the appliance.
If space for air intake is not enough, humidification capacity may decrease.
➔
If the appliance is too near wall side, the wall paper may get damaged.
➔
∙ When installing the product, make sure that no heavy objects are on the power cord.
Failure to do so may result in electric shock or fire.
➔
FOR POWER CORD / WARNING
∙ Unplug the product, and then remove foreign substances (dust, moisture, etc.)
of the power plug terminal or power plug connection part with a dry cloth on a
regular basis.
Otherwise, electric shock or fire may occur.
➔
∙ When the product, power plug or power cord is damaged, contact your nearest
service center.
∙ Plug the power plug into the wall socket firmly. Do not use a damaged power plug,
damaged power cord or loose wall socket.
Failure to do so may result in electric shock or fire.
➔
∙ When unplugging the product, do not pull the power cord. Grip the power plug, and
then pull the power plug.
Otherwise, electric shock or fire may occur.
➔
∙ Do not pull or excessively bend the power cord. Do not twist or tie the power cord.
∙ Do not hook the power line over a metal object, place a heavy object on the power
cord, insert the power line between objects, or push the power cord into the space
behind the appliance.
This may result in electric shock or fire.
➔
EN 5